Specifications

Altitude 3500 Series Access Point Product Reference Guide
493
AP35xx>admin(system.config)> export
Exports the configuration from the system.
Syntax
Example
Export FTP
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config)>set file config.txt
admin(system.config)>set passwd
admin(system.config)>export ftp
Export operation : [ Started ]
Building configuration file : [ Done ]
File transfer : [ In progress ]
File transfer : [ Done ]
Export Operation : [ Done ]
Export TFTP
admin(system.config)>set server 192.168.0.101
admin(system.config)>set file config.txt
admin(system.config)>export tftp
Export operation : [ Started ]
Building configuration file : [ Done ]
File transfer : [ In progress ]
File transfer : [ Done ]
Export Operation : [ Done ]
CAUTION
Make sure a copy of the AP35xx’s current configuration is exported (to a secure location) before exporting
the access point’s configuration, as you will want a valid version available in case errors are encountered with the
configuration export.
For information on importing/exporting access point configurations using the applet (GUI), see
“Importing/Exporting Configurations” on page 103.
export ftp Exports the AP35xx configuration to the FTP server. Use the set command to set the
server, user, password, and file name before using this command.
tftp Exports the AP35xx configuration to the TFTP server. Use the set command to set the IP
address for the TFTP server before using the command.
terminal Exports the AP35xx configuration to a terminal.