Specifications

Altitude 3500 Series Access Point Product Reference Guide
415
AP35xx>admin(system.access)>set
Defines the permissions to access the AP35xx applet, CLI, SNMP as well as defining their timeout
values.
Syntax
For information on configuring access point access settings using the applet (GUI), see “Configuring
Data Access” on page 72.
set applet Defines the applet HTTP/HTTPS access parameters.
app-timeout <minutes> Sets the applet timeout. Default is 300 Mins.
cli Defines CLI Telnet access parameters. Enables/disables access
from lan and wan.
ssh Sets the CLI SSH access parameters.
trusted-host <mode>,
<range>
<clear>
Enables/Disables global management access (snmp, http, https,
telnet and ssh) for up to 8 addresses (hosts).
auth-timout <seconds> Disables the radio interface if no data activity is detected after
the interval defined. Default is 120 seconds.
inactive-timeout <minutes> Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
snmp Sets SNMP access parameters.
admin-auth Designates a RADIUS server is used in the authentication
verification.
server <ip> Specifies the IP address the Remote Dial-In User Service
(RADIUS) server.
port <port#> Specifies the port on which the RADIUS server is listening.
Default is 1812.
secret <pw> Defines the shared secret password for RADIUS server
authentication.
mode <mode> Enables/disables the access point message mode.
msg Defines the access point login message text.