Specifications

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
394
AP35xx>admin(network.firewall)> show
Displays the AP35xx firewall parameters.
Syntax
Example
admin(network.firewall)>show
Firewall Status : disable
NAT Timeout : 10 minutes
Configurable Firewall Filters:
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192 bytes
max mime headers : 16 headers
For information on configuring the Firewall options available to the access point using the applet (GUI),
see “Configuring Firewall Settings” on page 188.
show Shows all AP35xx’s firewall settings.