Specifications

Altitude 3500 Series Access Point Product Reference Guide
365
AP35xx>admin(network.wireless.radio.802-11a)> set
Defines specific 802.11a radio parameters.
Syntax
set
placement : set Radio location
:
ch-mode : set Channel Selection
channel : set Channel (for User Selection only)
acs-exception-list : set ACS Exception list (for Auto Selection only)
antenna : set Antenna Diversity
power : set Power Level
rates : set Radio Data Rates
:
beacon : set Beacon Interval
dtim : set DTIM Period Interval
:
rts : set RTS Threshold
range : set extended range
qos : set RF QoS
:
qbss-beacon : set QBSS Channel Util Beacon Interval
qbss-mode : enable/disable QBSS Load Element
bcmc-tx-speed : set mode - range/throughput
Example
admin(network.wireless.radio.802-11a)>
admin(network.wireless.radio.802-11a)>set placement indoor
admin(network.wireless.radio.802-11a)>set ch-mode user
admin(network.wireless.radio.802-11a)>set channel 1
admin(network.wireless.radio.802-11a)>set acs-exception-list 44 153 161
admin(network.wireless.radio.802-11a)>set antenna full
admin(network.wireless.radio.802-11a)>set power 4
admin(network.wireless.radio.802-11a)>set rates
admin(network.wireless.radio.802-11a)>set beacon 100
admin(network.wireless.radio.802-11a)>set dtim 1 10
admin(network.wireless.radio.802-11a)>set rts 2341
admin(network.wireless.radio.802-11a)>set qos cwmin 125
admin(network.wireless.radio.802-11a)>set qos cwmax 255
admin(network.wireless.radio.802-11a)>set qos aifsn 7
admin(network.wireless.radio.802-11a)>set qos txops 0
admin(network.wireless.radio.802-11a)>set qbss-beacon 110
admin(network.wireless.radio.802-11a)>set qbss-mode enable
For information on configuring the Radio 2 Configuration options available to the access point using the
applet (GUI), see “Configuring the 802.11a or 802.11b/g Radio” on page 154.