Specifications

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
348
AP35xx>admin(network.wireless.acl)> create
Creates an MU ACL policy.
Syntax
Example
admin(network.wireless.acl.create)>show
Policy Name : Front Lobby
Policy Mode : allow
-----------------------------------------------------------------------------
index start mac end mac
-----------------------------------------------------------------------------
1 00A0F8334455 00A0F8334455
2 00A0F8400000 00A0F8402001
admin(network.wireless.acl.create)>set acl-name engineering
admin(network.wireless.acl.create)>set mode deny
admin(network.wireless.acl.create)>add-addr 00A0F843AABB
admin(network.wireless.acl.create)>add-policy
For information on configuring the ACL options available to the access point using the applet (GUI), see
“Configuring a WLAN Access Control List (ACL)” on page 139.
create show <acl-
name>
Displays the parameters of a new ACL policy.
set acl-name <index> Sets the MU ACL policy name.
mode <acl-
mode>
Sets the ACL mode for the defined index (1-16).
Allowed MUs can access the AP35xx managed LAN.
Options are deny and allow.
add-addr <mac1> or
<mac1>
<mac2>
Adds specified MAC address to list of ACL MAC
addresses.
delete <index> <all> Removes either a specified ACL index or all ACL
entries.
add-policy Completes the policy creation and exits the CLI.
.. Cancels the creation of the ACL and exits the CLI.