Specifications

Altitude 3500 Series Access Point Product Reference Guide
337
port <port> Set external RADIUS server port
number.
secret <secret> Set external RADIUS server
shared secret password.
timeout <period> Defines MU timeout period in
seconds (1-255).
retry <number> Sets the maximum number of
MU retries to <retry> (1-10).
syslog <mode> Enable or disable syslog
messages.
ip <ip> Defines syslog server IP
address.
adv mu-quiet <time> Set the EAP MU/supplicant quiet
period to <time> seconds (1-
65535).
mu-timeout <timeout> Sets the EAP MU/supplicant
timeout in seconds
(1-255).
mu-tx <time> Sets the EAP MU/supplicant TX
period <time> in seconds (1-
65535).
mu-retry <count> Sets the EAP maximum number
of MU retries to <count> (1-10).
svr-timeout <time> Sets the server timeout <time>
in seconds (1-255).
svr-retry <count> Sets the maximum number of
server retries to <count> (1-255).
Note: The WEP authentication
mechanism saves up to four
different keys (one for each
WLAN). It is not requirement to
set all keys, but you must
associate a WLAN with the
same keys.
enc <idx> <type> Sets the encryption type to
<type> (one of none, wep40,
wep104, keyguard, tkip, or
ccmp) for WLAN <idx>.
wep-
keyguard
passkey <passkey> The passkey used as a text
abbreviation for the entire key
length (4-32).
index <key index> Selects the WEP/KeyGuard key
(from one of the four potential
values of <key index> (1-4).
hex-key <kidx> <key string> Sets the WEP/KeyGuard key for
key index <kidx> (1-4) for WLAN
<kidx> to <key string>.
ascii-key <kidx> <key string> Sets the WEP/KeyGuard key for
key index <kidx> (1-4) for WLAN
<kidx> to <key string>.
mixed-mode <mode> Enables or disables
interoperation with WEP128
clients.