Specifications

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
322
AP35xx>admin(network.wireless.wlan)> show
Displays the AP35xx’s current WLAN configuration.
Syntax
Example
admin(network.wireless.wlan)>show summary
WLAN 1:
WLAN name : Lobby
ESS ID : 101
Radio : 11a,11b/g
VLAN : <none>
Security Policy : Default
QoS Policy : Default
Rate Limiting : disabled
admin(network.wireless.wlan)>show wlan 1
ESS Identifier : 101
WLAN Name : Lobby
802.11a Radio : available
802.11b/g Radio : available
Client Bridge Mesh Backhaul : not available
Hotspot : not available
Maximum MUs : 127
Security Policy : Default
MU Access Control : Default
Kerberos User Name :
Kerberos Password : ********
Disallow MU to MU Communication : disable
Use Secure Beacon : disable
Accept Broadcast ESSID : enable
QoS Policy : Default
per-mu rate limiting : disable
per-mu rate limit (wired-to-wl) : 65536000 kb
per-mu rate limit (wl-to-wired) : 65536000 kb
For information on displaying WLAN information using the applet (GUI), see “Enabling Wireless LANs
(WLANs)” on page 133.
show summary Displays the current configuration for existing WLANs.
wlan <number> Displays the configuration for the requested WLAN (WLAN 1 through 16).