Specifications

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
306
For information on configuring VPN using the applet (GUI), see “Configuring VPN Tunnels” on
page 194.
salife <name> <lifetime> Defines the name of the tunnel <name>
the Security Association Life Time <300-
65535> applies to in seconds.
ike
opmode <name> <opmode> Sets the Operation Mode of IKE for
<name> to Main or Aggr(essive).
myidtype <name> <idtype> Sets the Local ID type for IKE
authentication for <name> (1 to 13
characters) to <idtype> (IP, FQDN, or
UFQDN).
remidtype <name> <idtype> Sets the Remote ID type for IKE
authentication for <name> (1 to 13
characters) to <idtype> (IP, FQDN, or
UFQDN).
myiddata <name> <idtype> Sets the Local ID data for IKE
authentication for <name> to <idtype>.
This value is not required when the ID
type is set to IP.
remiddata <name> <idtype> Sets the Local ID data for IKE
authentication for <name> to <idtype>.
This value is not required when the ID
type is set to IP.
authtype <name> <authtype> Sets the IKE Authentication type for
<name> to <authtype> (PSK or RSA).
authalgo <name> <authalgo> Sets the IKE Authentication Algorithm for
<name> to MD5 or SHA1.
phrase <name> <phrase> Sets the IKE Authentication passphrase
for <name> to <phrase>.
encalgo <name> <encalgo> Sets the IKE Encryption Algorithm for
<name> to <encalgo> (one of DES, 3DES,
AES128, AES192, or AES256).
lifetime <name> <lifetime> Sets the IKE Key life time in seconds for
<name> to <lifetime>.
group <name> <group> Sets the IKE Diffie-Hellman Group for
<name> to either G768 or G1024.