Specifications

Altitude 3500 Series Access Point Product Reference Guide
305
AP35xx>admin(network.wan.vpn)> set
Sets VPN entry parameters.
Syntax
set type <name> <tunnel type> Sets the tunnel type <name> to Auto or
Manual for the specified tunnel name.
authalgo <name> <authalgo> Sets the authentication algorithm for
<name> to (None, MD5, or SHA1).
authkey <name> <dir> <authkey> Sets the AH authentication key (if type is
Manual) for tunnel <name> with the
direction set to IN or OUT, and the manual
authentication key set to <authkey>. (The
key size is 32 hex characters for MD5,
and 40 hex characters for SHA1).
esp-type <name> <esptype> Sets the Encapsulating Security Payload
(ESP) type. Options include None, ESP,
or ESP-AUTH.
esp-encalgo <name> <escalgo> Sets the ESP encryption algorithm.
Options include DES, 3DES, AES128,
AES192, or AES256).
esp-enckey <name> <dir> <enckey> Sets the Manual Encryption Key in ASCII
for tunnel <name> and direction IN or
OUT to the key <enc-key>. The size of the
key depends on the encryption algorithm.
- 16 hex characters for DES
- 48 hex characters for 3DES
- 32 hex characters for AES128
- 48 hex characters for AES192
- 64 hex characters for AES256
esp-authalgo <name> <authalgo> Sets the ESP authentication algorithm.
Options include MD5 or SHA1.
esp-authkey <name> <dir> <authkey> Sets ESP Authentication key <name>
either for IN or OUT direction to <auth-
key>, an ASCII string of hex characters. If
authalgo is set to MD5, then provide 32
hex characters. If authalgo is set to SHA1,
provide 40 hex characters.
spi <name> <algo> <dir> <value> Sets 6 character IN(bound) or
OUT(bound) for AUTH (Manual
Authentication) or ESP for <name> to
<spi> (a hex value more than 0xFF)
<value>.
usepfs <name> <mode> Enables or disables Perfect Forward
Secrecy for <name>.