Specifications

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
296
AP35xx>admin(network.wan)> set
Defines the configuration of the AP35xx WAN port.
Syntax
Example
admin(network.wan)>
admin(network.wan)>set dhcp disable
admin(network.wan)>set ipadr 157.169.22.5
admin(network.wan)>set dgw 157.169.22.1
admin(network.wan)>set dns 1 157.169.22.2
admin(network.wan)>set auto-negotiation disable
admin(network.wan)>set speed 10M
admin(network.wan)>set duplex half
admin(network.wan)>set mask 255.255.255.000
admin(network.wan)>set pppoe mode enable
admin(network.wan)>set pppoe type chap
admin(network.wan)>set pppoe user jk
admin(network.wan)>set pppoe passwd @#$goodpassword%$#
admin(network.wan)>set pppoe ka enable
admin(network.wan)>set pppoe idle 600
For an overview of the WAN configuration options available using the applet (GUI), see “Configuring
WAN Settings” on page 125.
set wan enable/disable Enables or disables the AP35xx WAN port.
dhcp enable/disable Enables or disables WAN DHCP Client mode.
ipadr <idx> <a.b.c.d> Sets up to 8 (using <indx> from 1 to 8) IP
addresses <a.b.c.d> for the AP35xx WAN interface.
mask <a.b.c.d> Sets the subnet mask for the AP35xx WAN
interface.
dgw <a.b.c.d> Sets the default gateway IP address to <a.b.c.d>.
dns <idx> <a.b.c.d> Sets the IP address of one or two DNS servers,
where <indx> indicates either the primary (1) or
secondary (2) server, and <a.b.c.d> is the IP
address of the server.
auto-
negotiation
enable/disable Enables or disables auto-negotiation for the access
point WAN port.
speed <mbps> Defines the access point WAN port speed as either
10 Mbps or 100 Mbps.
duplex <mode> Defines the access point WAN port duplex as either
half or full.
pppoe mode enable/disable Enables or disables PPPoE.
user <name> Sets PPPoE user name.
passwd <password> Defines the PPPoE password.
ka enable/disable Enables or disables PPPoE keepalive.
idle <time> Sets PPPoE idle time.
type <auth-type> Sets PPPoE authentication type.