Specifications

CLI Reference
Altitude 3500 Series Access Point Product Reference Guide
260
Accessing the CLI via Telnet
To connect to the AP35xx CLI through a Telnet connection:
1 If this is your first time connecting to your access point, keep in mind the access point uses a static
IP WAN address (10.1.1.1). Additionally, the access point’s LAN port is set as a DHCP client.
2 Enter the default username of admin and the default password of admin123. If this is your first time
logging into the access point, you are unable to access any of the access point’s commands until the
country code is set. A new password will also need to be created.
Admin and Common Commands
AP35xx>admin>
Displays admin configuration options. The items available under this command are shown below.
help Displays general user interface help.
passwd Changes the admin password.
summary Shows a system summary.
network Goes to the network submenu
system Goes to the system submenu.
stats Goes to the stats submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.