Specifications

Configuring Access Point Security
Altitude 3500 Series Access Point Product Reference Guide
216
6 Click Cancel (if necessary) to undo any changes made and return to the Active APs screen.
Using MUs to Detect Rogue Devices
Certain Motorola MUs can be used for rogue AP detection. The access point can use an associated MU
that has its rogue AP detection feature enabled to scan for rogue APs. Once detected, the rogue AP(s)
can be moved to the list of allowed devices (if appropriate) within the Active APs screen. When adding
an MU’s detection capabilities with the access point’s own rogue AP detection functionality, the rogue
detection area can be significantly extended.
To use associated rogue AP enabled MUs to scan for rogue APs:
1 Select Network Configuration > Wireless > Rogue AP Detection > MU Scan from the Altitude 35xx menu
tree.
The On Demand MU Scan screen displays with associated MUs with rogue AP detection enabled.
2 Highlight an MU from within the Rogue AP enabled MUs field and click the scan button.
The target MU begins scanning for rogue devices using the detection parameters defined within the
Rogue AP Detection screen. To modify the detection parameters, see “Configuring Rogue AP
Detection” on page 210.
Those devices detected as rogue APs display within the Scan Result table. Use the displayed AP
MAC, ESSID and RSSI values to determine the device listed in the table is truly a rogue device or
one inadvertently detected as a rogue AP.