Specifications

Configuring Access Point Security
Altitude 3500 Series Access Point Product Reference Guide
206
To view VPN status:
1 Select Network Configuration > WAN > VPN > VPN Status from the Altitude 35xx menu tree.
2 Reference the Security Associations field to view the following:
Tunnel Name The Tunnel Name column lists the names of all the tunnels
configured on the Altitude 35xx. For information on
configuring a tunnel, see “Configuring VPN Tunnels” on
page 194.
Status The Status column lists the status of each configured
tunnel. When the tunnel is not in use, the status reads
NOT_ACTIVE. When the tunnel is connected, the status
reads ACTIVE.
Outb SPI The Outb SPI column displays the outbound Security
Parameter Index (SPI) for each tunnel. The SPI is used
locally by the Altitude 35xx to identify a security
association. There are unique outbound and inbound SPIs.
Inb SPI The Inb SPI column displays the inbound SPI Security
Parameter Index (SPI) for each of the tunnels. The SPI is
used locally by the Altitude 35xx to identify a security
association. There are unique outbound and inbound SPIs.
Life Time Use the Life Time column to view the lifetime associated
with a particular Security Association (SA). Each SA has a
finite lifetime defined. When the lifetime expires, the SA
can no longer be used to protect data traffic. The
maximum SA lifetime is 65535 seconds.