Specifications

Altitude 3500 Series Access Point Product Reference Guide
197
4 Click Apply to save any changes to the VPN screen as well as changes made to the Auto Key
Settings, IKE Settings and Manual Key Settings screens. Navigating away from the screen without
clicking the Apply button results in all changes to the screens being lost.
5 Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings
displayed on the VPN, Auto Key Settings, IKE Settings and Manual Key Settings screens to the last
saved configuration.
6 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.
Configuring Manual Key Settings
A transform set is a combination of security protocols and algorithms applied to IPSec protected traffic.
During security association (SA) negotiation, both gateways agree to use a particular transform set to
protect data flow.
A transform set specifies one or two IPSec security protocols (either AH, ESP, or both) and specifies the
algorithms to use for the selected security protocol. If you specify an ESP protocol in a transform set,
specify just an ESP encryption transform or both an ESP encryption transform and an ESP
authentication transform.
When the particular transform set is used during negotiations for IPSec SAs, the entire transform set
(the combination of protocols, algorithms, and other settings) must match a transform set at the remote
end of the gateway.
Use the Manual Key Settings screen to specify the transform sets used for VPN access.
To configure manual key settings for the Altitude 35xx:
1 Select Network Configuration > WAN > VPN from the Altitude 35xx menu tree.
2 Refer to the VPN Tunnel Config field, select the Manual Key Exchange radio button and click the
Manual Key Settings button.
Manual Key
Exchange
Selecting Manual Key Exchange requires you to manually
enter keys for AH and/or ESP encryption and
authentication. Click the Manual Key Settings button to
configure the settings.
Manual Key
Settings
Select Manual Key Exchange and click the Manual Key
Settings button to open a screen where AH authentication
and ESP encryption/authentication can be configured and
keys entered. For more information, see “Configuring
Manual Key Settings” on page 197.
Auto (IKE) Key
Exchange
Select the Auto (IKE) Key Exchange checkbox to configure
AH and/or ESP without having to manually enter keys. The
keys automatically generate and rotate for the
authentication and encryption type selected.
Auto Key Settings Select the Auto (IKE) Key Exchange checkbox, and click
the Auto Key Settings button to open a screen where AH
authentication and ESP encryption/authentication can be
configured. For more information, see “Configuring Auto
Key Settings” on page 200.
IKE Settings After selecting Auto (IKE) Key Exchange, click the IKE
Settings button to open a screen where IKE specific
settings can be configured. For more information, see
“Configuring IKE Key Settings” on page 202.