Specifications

Altitude 3500 Series Access Point Product Reference Guide
193
To configure Altitude 35xx Advanced Subnet Access:
1 Select Network Configuration > Firewall > Advanced Subnet Access from the Altitude 35xx menu tree.
2 Configure the Settings field as needed to override the settings in the Subnet Access screen and
import firewall rules into the Advanced Subnet Access screen.
3 Configure the Firewall Rules field as required add, insert or delete firewall rules into the list of
advanced rules.
Override Subnet
Access settings
Select this checkbox to enable advanced subnet access
rules and disable existing subnet access rules, port
forwarding, and 1 to many mappings from the system.
Only enable advanced subnet access rules if your
configuration requires rules that cannot be configured
within the Subnet Access screen.
Import rules from
Subnet Access
Select this checkbox to import existing access rules (NAT,
packet forwarding, VPN rules etc.) into the Firewall Rules
field. This rule import overrides any existing rules
configured in the Advanced Subnet Access screen. A
warning box displays stating the operation cannot be
undone.
Inbound or
Outbound
Select Inbound or Outbound from the drop-down menu to
specify if a firewall rule is intended for inbound traffic to an
interface or outbound traffic from that interface.
Add Click the Add button to insert a new rule at the bottom of
the table. Click on a row to display a new window with
configuration options for that field.