Specifications

Altitude 3500 Series Access Point Product Reference Guide
161
8 Use the Primary WLAN drop-down menu to select a WLAN from those WLANs sharing the same
BSSID. The selected WLAN is the primary WLAN for the specified BSSID.
9 Click Apply to save any changes to the Radio Settings and Advanced Settings screens. Navigating
away from the screen without clicking Apply results in changes to the screens being lost.
10 Click Undo Changes (if necessary) to undo any changes made to the screen and its sub-screens. Undo
Changes reverts the settings to the last saved configuration.
11 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.
Configuring WIPS Server Settings
An access point radio can function as a Wireless Intrusion Protection System (WIPS) sensor and upload
sensor mode operation information to its parent WIPS Server. Either or both of the access point’s radios
can be set as a WIPS sensor. When an access point radio is functioning as a WIPS sensor, it is able to
scan in sensor mode across all available channels.
NOTE
WIPS support requires a Motorola AirDefense WIPS Server on the network. WIPS functionality is not
provided by the access point alone. The access point works in conjunction with a dedicated WIPS server.
Additionally, use the WIPS screen to define a primary and alternate WIPS server to submit event
information for use within the WIPS console for device management and potential threat notification.
Status Displays the following color coded status:
Red—Error (Invalid Configuration)
Yellow—Warning (Broadcast Downgrade)
Green—Good (Configuration is OK)
Message Displays the verbal status of the WLAN and BSSID
assignments. If the Status column displays green, the
Message will typically be Configuration is OK. If yellow, a
description of invalid configuration displays.