Specifications

Network Management
Altitude 3500 Series Access Point Product Reference Guide
136
3 Set the parameters in the Configuration field as required for the WLAN.
ESSID Enter the Extended Services Set Identification (ESSID)
associated with the WLAN. The WLAN name is auto-
generated using the ESSID until changed by the user. The
maximum number of characters that can be used for the
ESSID is 32.
Name Define or revise the name for the WLAN. The name should
be logical representation of WLAN coverage area
(engineering, marketing etc.). The maximum number of
characters that can be used for the name is 31.
Available On Use the Available On checkboxes to define whether the
WLAN you are creating or editing is available to clients on
either the 802.11a or 802.11b/g radio (or both radios). The
Available On checkbox should only be selected for a mesh
WLAN if this target access point is to be configured as a
base bridge or repeater (base and client bridge) on the
radio. If the radio for the WLAN is to be defined as a client
bridge only, the Available On checkbox should not be
selected.