Specifications

Network Management
Altitude 3500 Series Access Point Product Reference Guide
132
Configuring Dynamic DNS
The access point supports the Dynamic DNS service. Dynamic DNS (or DynDNS) is a feature offered by
www.dyndns.com which allows the mapping of domain names to dynamically assigned IP addresses via
the WAN port. When the dynamically assigned IP address of a client changes, the new IP address is
sent to the DynDNS service and traffic for the specified domain(s) is routed to the new IP address.
NOTE
DynDNS supports only the primary WAN IP address.
To configure dynamic DNS for the Altitude 35xx:
1 Select Network Configuration > WAN > DynDNS from the Altitude 35xx menu tree.
2 Select the Enable checkbox to allow domain name information to be updated when the IP address
associated with that domain changes.
A username, password and hostname must be specified for domain name information to be
updated.
NOTE
The username, password and hostname are required to be registered at http://www.dyndns.com.
3 Enter the DynDNS Username for the account you wish to use for the access point.
4 Enter the DynDNS Password for the account you wish to use for the access point.
5 Provide the Hostname for the DynDNS account you wish to use for the access point.