Specifications

Altitude 3500 Series Access Point Product Reference Guide
125
4 To optionally delete a type filtering selection from the list, highlight the packet type and click the
Delete button.
5 Click Apply to save any changes to the LAN1 or LAN2 Ethernet Type Filter Configuration screen.
Navigating away from the screen without clicking Apply results in all changes to the screens being
lost.
6 Click Undo Changes to securely exit the LAN1 or LAN2 Ethernet Type Filter Configuration screen
without saving your changes.
7 Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout before
the applet is closed.
Configuring WAN Settings
A Wide Area Network (WAN) is a widely dispersed telecommunications network. The Altitude 35xx
includes one WAN port. The Altitude 35xx WAN port has its own MAC address. In a corporate
environment, the WAN port might connect to a larger corporate network. For a small business, the
WAN port might connect to a DSL or cable modem to access the Internet.
Use the WAN screen to set the WAN IP configuration and Point-to-Point Protocol over Ethernet (PPPoE)
parameters.
To configure WAN settings for the Altitude 35xx:
1 Select Network Configuration > WAN from the Altitude 35xx menu tree.