Specifications

System Configuration
Altitude 3500 Series Access Point Product Reference Guide
108
If a firmware update is required, use the Firmware Update screen to specify a filename and define a file
location for updating the firmware.
NOTE
The firmware file must be available from an FTP or TFTP site to perform the update.
CAUTION
Make sure a copy of the AP35xx’s configuration is exported before updating the firmware.
To conduct a firmware update on the AP35xx:
1 Export the AP35xx current configuration settings before updating the firmware to have the most
recent settings available after the firmware is updated.
Refer to “Importing/Exporting Configurations” on page 103 for instructions on exporting the
AP35xx’s current configuration to have it available after the firmware is updated.
2 Select System Configuration > Firmware Update from the AP35xx menu tree.
3 Configure the DHCP Options checkboxes to enable/disable automatic firmware and/or configuration
file updates.
DHCP options are used for out-of-the-box rapid deployment for Extreme Networks wireless
products. The following are the two options available on the access point: