Specifications

Altitude 3500 Series Access Point Product Reference Guide
101
LLDP transmits periodic advertisements containing device information and media-specific configuration
information to neighbors attached to the same network. LLDP agents cannot solicit information from
other agents by using LLDP.
To configure LLDP support:
1 Select System Configuration > LLDP from the menu tree.
2 Select the Enable LLDP radio button to enable or disable the transmission of LLDP advertisements.
LLDP is enabled by default.
3 Set a Refresh Interval (in seconds 5-32768) to define the LLDP refresh-interval/transmit interval. The
Refresh Interval is the interval LLDP frames are transmitted on behalf of the LLDP agent. The default
is 30 seconds.
4 Set a Hold time Multiplier (2-10) to define the hold time multiplier. This parameter is a multiplier on
the Refresh Interval that determines the actual TTL value used in an LLDPDU. The default setting is
4.
5 Click Apply to save any changes to the LLDP screen. Navigating away from the screen without
clicking the Apply button results in all changes to the screen being lost.
6 Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the settings
displayed on LLDP screen to the last saved configuration.