Installation guide

1-16 Alpine 3800 Series Switch Hardware Installation Guide
A
LPINE
3800 S
ERIES
S
WITCH
O
VERVIEW
FM-24FI MODULE
The FM-24F module is shown in Figure 1-9.
Figure 1-9: FM-24Fi module
The FM-24Fi module has 24 100BASE-FX ports. All FM-24Fi ports use standard MT-RJ
connectors. The default configuration of the FM-24Fi module is as follows:
All ports are added to the default VLAN as untagged.
All ports inherit the properties of the default VLAN (protocol type, VLANid, and so
on).
All ports are in 100 Mbps, full-duplex mode. Half-duplex mode is not supported.
I/O M
ODULE LEDS
Tab le 1-6 describes the LED behavior on the I/O modules.
Table 1-6: I/O Module LEDs
LED Color Indicates
Status Green solid
Amber solid
Normal operation
Disabled
Port
x
(except
FM-24F)
Green
Flashing Green
Amber
Off
Link up
Disabled
Packet activity
Link down
Port
x
(FM24-F only)
Green
Flashing Green
Off
Link up
Packet activity
Link down
38_FM24F
Module status LED
242322212019181716151413121110987654321
100 Mbps ports
with status LEDs