Specifications

94 ExtremeWare 7.3.1b3 Release Notes
Clarifications, Known Behaviors, and Resolved Issues
• PEAP (802.1x only)
Network Login Supplicant Software Interoperability
The following supplicant software applications are tested and supported with Network Login:
• Web-Based: Internet Explorer 6 web browser
• Web-Based: Netscape Navigator 7 web browser
• 802.1x: Microsoft Windows XP native OS client
• 802.1x: Microsoft Windows 2000 Professional native OS client (patch 313664)
• 802.1x: Funk Odyssey Client, version 2.0
• 802.1x: MeetingHouse Data AEGIS Client for Windows, version 2.0.5
• 802.1x: MeetingHouse Data AEGIS for Windows, version 1.3.6.1
• 802.1x: MeetingHouse Data AEGIS for Linux, version 1.1.2
RADIUS and the BlackDiamond
When RADIUS authentication is configured on a BlackDiamond switch, upon reboot, you will see the
following message indicating that the system is initializing before authentication messages will be
transmitted to the configured RADIUS server(s) (7046):
“Warning: Radius is going to take one minute to initialize.”
RADIUS and Telnet
If one of the following two situations occurs:
1 You have a single RADIUS server configured with a RADIUS timeout value of 10 seconds or more
2 Both primary and secondary RADIUS servers lose their connections and the configured RADIUS
timeout value is 5 seconds or more
The switch might not be able to fail over to the local user authentication for telnet sessions. If this
happens, the switch cannot be accessed via telnet. This does not occur with the default RADIUS timeout
configuration of 3 seconds, or when using alternate session types such as console, SSH, or Vista
management (PD2-109828821).
The show netlogin Command Output
If you remove a module with configured Network Login ports and reboot the switch, the output of the
show netlogin command incorrectly omits the configured ports. Network Login remains enabled on
the configured ports and operates correctly if you reinstall the module (PD2-92593101).
SLB and Flow Redirection
Do Not Use SLB and NAT on the Same Switch
Do not use SLB and NAT on the same switch (PD2-224957457).