Specifications

68 ExtremeWare 7.3.1b3 Release Notes

Clarifications, Known Behaviors, and Resolved Issues

expected. To work around this, use the configure sys-health-check auto recovery 3 offline

command (PD2-105991401).

10 Gigabit Ethernet and CMT

If you use 10GLRi or XENPAK ports with the address-based or round robin load-sharing algorithms

and the master link is lost, FDB entries are not learned (PD2-197753713).

XENPAK with the BlackDiamond 6816

On a BlackDiamond 6816, if you configure the MSM to keep links up, save the configuration, and

reboot the switch, XENPAK links do not come up (PD2-198280301).

Cross-Module Trunking Not Supported on MSM64i’s

If you enable cross-module trunking on a chassis with MSM64i’s installed, you receive the following

error message:

All load share ports must be on the same module

Cross-module trunking is not supported with MSM64i’s. To enable load sharing across modules, install

MSM-3’s (PD2-193845958).

Cross-Module Trunking Module Support

Table 24 lists the modules that support load-sharing across modules.

Table 24: Cross-module trunking module support

Module CMT Support

G8Xi Yes

G8Ti Yes

G12SXi Yes

G16X

Yes

G24T

Yes

F32Fi Yes

F48Ti Yes

F96Ti Yes

WDMi No

10GLRi Yes

10GX3 Yes

MPLS No

ARM No

P3cMi No

P3cSi No

P12cMi No

P12cSi No

A3cMi No

A3cSi No