Specifications

Supported Hardware
ExtremeWare 7.3.1b3 Release Notes 25
Summit Component Support
Summit components supported with ExtremeWare 7.3, and the minimum ExtremeWare version
required, include:
FM-24Ti 6.1.7
FM-24SFi 6.1.7
FM-32Pi 7.2.0b18
GM-WDMi 6.1.8
WM-4T1i 7.0.1
WM-4E1i 7.0.1
WM-1T3i 7.0.1
FM-8Vi 7.0.1
AC Power Supply 6.1
DC Power Supply 6.1.5
1. Older switches do not require ExtremeWare 6.2.2b56. To
determine the minimum revision required for your switch,
see Field Notice 115A, here:
http://www.extremenetworks.com/services/documentation/
FieldNotices_FN0115-MACAddressSoftwareReqmt.asp.
Table 5: Summit component support
Summit Component ExtremeWare Required
Summit1i 6.2.2b56
1
1. Older switches do not require ExtremeWare 6.2.2b56. To determine the
minimum revision required for your switch, see Field Notice 115A, here:
http://www.extremenetworks.com/services/documentation/FieldNotices_
FN0115-MACAddressSoftwareReqmt.asp.
Summit5i 6.2.2b56
1
Summit7i 6.2.2b56
1
Summit7i DC Power Supply 6.2.2b56
1
Summit48i 6.2.2b56
1
Summit48si 6.2.2b56
1
Summit48si DC Power Supply 7.1.1
2
2. ExtremeWare 6.2.2 recognizes the Summit48si DC power supply, but
does not indicate the type of PSU installed, issue a warning if both an
AC and a DC PSU are installed in the same chassis, or send an SNMP
trap message when the PSU is hot-swapped.
Table 4: Alpine component support (continued)
Alpine Component ExtremeWare Required