Specifications

108 ExtremeWare 7.3.1b3 Release Notes
Clarifications, Known Behaviors, and Resolved Issues
If you specify a VLAN as the local end point for an RSVP-TE path, the switch no longer allows you to
change the VLAN’s IP address, unconfigure the IP address, or delete the VLAN. Use the
show mpls
rsvp-te path
command to verify the local end point configuration (PD2-164224901, PD2-229594005).
Removing the MSM in a BlackDiamond switch doing MPLS TLS no longer causes some of the FDB
entries to start aging (PD2-199171614).
Alpine
When you reseat the fan tray in an Alpine 3804 or Alpine 3808, the status LED on the SMMi blinks
(PD2-205947223).
Vista
If you configure a new VLAN tag the same as an existing loopback VID, the httpd task no longer
crashes (PD2-187697373).
SNMP
When using SNMP to configure an MSM-3, the SNMPv3 configuration is now preserved after an MSM
failover (PD2-170807501, PD2-230083730).
SNMPv3 configuration now includes an encrypted keyword so that there are no longer any increment
download failures. You can also now manually cut or paste the configuration to another switch without
causing a system failure (PD2-227273841, PD2-249685296).
Spanning Tree
The vlan keyword can now be used with the enable/disable stpd ports <portlist> command
(PD3-1362824).
Security and Access Policies
If an FDB rule has the ignore-overlap option set, similar IP ACL rules can now be created
(PD2-197365033, PD2-227975790).
The following RADIUS demultiplexer handler error message has been changed from Warning to
Informational:
<INFO:WLAN> <WLAN> Port 1:44 Radius server 1 no handler for demux id 168
(PD2-237095201)
Switching and VLANs
Using the show vlan stats command on multiple VLANs no longer stops switch-bound ping and
Telnet packets. The Summit48si no longer drops Layer 2 packets (PD2-225385621, PD2-249685284).