Installation guide

Summit5i Switch
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide 91
Summit5i Switch
The Summit5i switch is 2U high; it is available in three port configurations:
• 12 autosensing 100BASE-TX/1000BASE-T ports with RJ-45 connectors and 4 1000BASE-X ports with
SC connectors (Figure 38)
• 12 1000BASE-SX ports with MT-RJ connectors and 4 1000BASE-X ports with SC connectors
(Figure 39)
• 12 1000BASE-LX ports with either MT-RJ or LC connectors (Figure 40 shows LC connectors) and
4 1000BASE-X ports with SC connectors (Figure 40)
To determine the type of connectors on your Summit5iLX switch, look at the serial number on the
rear of the switch. Serial numbers that start with 0233 and lower have MT-RJ connectors. Serial
numbers that start with 0234 and higher have LC connectors. For example, a Summit5iLX switch
with the serial number 0234M-00012 has LC connectors.
Figure 38: Front view of the Summit5i switch with 100BASE-TX/1000BASE-T ports
Figure 39: Front view of the Summit5i switch with 1000BASE-SX ports
Port status LEDs Gigabit Ethernet ports
SHG_S5
T
3421
7865
11 12109
13 161514
12345678
TOP ROWS:
GREEN = 1000Mbps
BOTTOM ROWS:
AMBER
GREEN
FLASHING GREEN
= ACTIVITY
= LINK OK
= DISABLED
9 10111213141516
100BASE-TX/
1000BASE-T
1000BASE-X
PSU A
PSU B
MGMT
100/1000 Mbps ports Unit status LEDs
Port status LEDs Gigabit Ethernet ports
SHG_S5SX
13 161514
1000 Mbps ports Unit status LEDs
4321 8765
1211109