Installation guide

Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide 315
B Switch Technical Specifications
This appendix describes the hardware technical specifications for “e” and “i” series of Extreme Network
switches. The appendix is organized into the following sections:
• Common Switch Specifications on page 315
• Summit 200 Series Switch Specifications on page 318
• Summit 300 Series Switch Specifications on page 322
• Summit 400 Series Switch Specifications on page 326
• Summit “i” Series Switch Specifications on page 327
• Alpine 3800 Series Switch Specifications on page 330
• BlackDiamond 6800 Series Switch Specifications on page 333
• Power Connector Specifications on page 337
For information about the software technical specifications including protocols, MIBs, and standards,
see the ExtremeWare Software Users Guide.
Common Switch Specifications
Table 63 lists specifications for environmental requirements, safety, electromagnetic interference, and
certification marks that apply to all the Extreme Networks switches. “Console Port Cables” on page 316
provides information about the cables used to connect console ports on Extreme Networks switches.
Table 63: Common switch specifications
Environmental Requirements
Operating Temperature 0° to 40° C (32° to 104° F)
Storage Temperature -40° to 70° C (-40° to 158° F)
Operating Humidity 10% to 95% relative humidity, noncondensing
Standards EN60068 to Extreme IEC68 schedule EN 300 019 (Summit
200 and Summit 400)