Installation guide

264 Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide
BlackDiamond 6800 Series I/O Modules
NOTE
See the ExtremeWare Software User Guide and the ExtremeWare Command Reference Guide for more
information about configuring I/O modules.
10GX
3
Module
Figure 152 shows the 10GX
3
module.
Figure 152: 10GX
3
module
The 10GX
3
is a BlackDiamond I/O module with a single 10 Gigabit Ethernet port available using one
XENPAK connector.
The 10GX
3
has the following system and hardware features:
• One 10GbE XENPAK port per module; complies with XENPAK MSA
• Single I/O slot module for BlackDiamond 6804, BlackDiamond 6808, and BlackDiamond 6816
— No chassis upgrade required
— Supported by current management modules
— Compatible with all BlackDiamond I/O modules
• Hot-swappable
• 802.3x Flow Control Generation (on transmit to throttle receive traffic)
• Up to 16 gigabit full-duplex bandwidth
Module status LEDs
10Gb port
10GX_001