Installation guide

BlackDiamond 6804 Switch
Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide 225
BlackDiamond 6804 Switch
The BlackDiamond 6804 switch consists of the following components:
• One 6-slot chassis with backplane
• Four I/O module slots, labeled slots 1 through 4
• Two MSM64i slots, labeled slots A and B
• Two power supply bays (accessed from the front of the unit)
• One hot-swappable fan tray containing six individual fans, accessed from the front of the unit
• One electrostatic discharge (ESD) wrist strap connector
The BlackDiamond 6804 switch can support up to the following number of ports and types of port
configurations:
• 384 switched 10BASE-T/100BASE-TX Ethernet ports
• 128 switched 100BASE-FX Fast Ethernet ports
• 48 switched Gigabit Ethernet ports
• 64 switched 1000BASE-X oversubscribed ports
• 96 switched 10/100/1000BASE-T oversubscribed ports
• 12 OC3 PoS ports
• 12 OC3 ATM ports
• 6 OC12 PoS ports
NOTE
PoS and ATM modules installed in a BlackDiamond chassis require at least one BlackDiamond Ethernet
I/O module also installed in the chassis in order to operate correctly.
Figure 125 shows the front of the BlackDiamond 6804 chassis fully populated with two MSMs and four
optional I/O modules.