Installation guide

Installing the AC Power Cable Retaining Bracket

Extreme Networks Consolidated "e" and "i" Series Hardware Installation Guide 131

If your switch has two power supplies, align the retaining brackets so that the retaining bracket

screws do not interfere with each other. Figure 71 and Figure 72 show typical bracket orientations.

Figure 71: Attaching two retaining brackets—first example

Figure 72: Attaching two retaining brackets—second example

7 Tighten the retaining bracket screw to secure the bracket around the power connector.

8 Connect the power cable to the power source.

9 If the switch has a power switch, set the power switch to the ON position.

LB48022A

Retaining bracket screw

SH_002

Retaining bracket screw