Installation guide

Altitude 300-2 Getting Started Guide 5
Preface
This preface provides an overview of this guide, describes guide conventions, and lists other
publications that might be useful.
NOTE
To ensure proper operation, read this guide before you install any Extreme Networks equipment.
Introduction
This guide provides the required information to install the Altitude 300-2 wireless port. It also contains
general product information about the Altitude 300-2. This guide is intended for use by network
administrators who are responsible for installing and setting up network equipment. It assumes a basic
working knowledge of the following topics:
• Local Area Networks (LANs)
• Ethernet concepts
• Simple 802.11 wireless LAN concepts
See the ExtremeWare Software User Guide for information about configuring an Extreme Networks
device.
NOTE
If the information in the Release Notes that shipped with your switch differs from the information in this
guide, follow the Release Notes.
Related Publications
The Extreme Networks wireless port documentation set includes:
• Altitude 300-2 Getting Started Guide (this guide)
• Unified Access Deployment Guide
• ExtremeWare Software User Guide
Documentation for Extreme Networks products is available on the World Wide Web at the following
location: