Installation guide

Mounting Options
Altitude 300-2 Getting Started Guide 17
Figure 8: Antenna Shroud Installation
Optional Plastic Cover
The optional plastic cover is designed to protect the Altitude 300-2 from casual tampering that could
affect client service. With the case in place, the Altitude 300-2 cannot be unlocked, the Ethernet
connection cannot be unplugged, the integrated antennas (Altitude 300-2i) cannot be rotated, and
external antennas (Altitude 300-2d) cannot be detached.
NOTE
The plastic cover should not be used in plenum installations such as above suspended ceilings or in
building mechanical areas.
The plastic cover can be painted with any paint that is suitable for polycarbonate plastic. The plastic
light pipe must be removed prior to painting. The light pipe assembly can be gently popped off using a
screwdriver that is slipped into the small lips provided on the light pipe. After painting, reinstall the
light pipe by snapping it back in place. It is not recommended that you paint the antennas.
You can order the plastic cover kit from Extreme Networks. Consult the Extreme Networks product
web site, www.extremenetworks.com, for the latest product information. The following models are
available:
• Product Number: 15922- five translucent covers and ten black antenna shrouds
• Product Number: 15923- five cool gray covers and ten black antenna shrouds
To install the plastic cover, follow these steps (Figure 9):
1 Make sure that the cable connections and antenna adjustments are made and the Altitude 300-2 is
locked or secured.
2 Place the cover directly over the box.
1
2
ALT008