Datasheet
Technical Specifications
6
Extreme Networks Data Sheet: Summit X670-48t
General Specifications
Quality of Service and Policies
1280 Gbps switch bandwidth, 960 Mpps forwarding rate
9216 Byte maximum packet size (Jumbo Frame)
Store-and-Forward and Cut-Through switching support
< 3.3 micro second latency (64-byte packet) for -48t copper models
128 load sharing trunks, up to 8 members per trunk
4,094 VLANs (Port, Protocol, IEEE 802.1Q)
2,048 ingress and 1,024 egress ACL rules per switch
Forwarding Tables
Layer 2/MAC Addresses: 128K
IPv4 Host Addresses: 16K
IPv4 LPM Entries: 16K
IPv6 Host Addresses: 8K
IPv6 LPM Entries: 8K
CPU, Memory
64-bit MIPS Processor, 1GHz clock
1GB ECC SDRAM
1GB Compact Flash
QoS, Rate Limiting
2,048 ingress rules and 512 ingress meters
Ingress and egress bandwidth policing/rate limiting per flow/ACL
8 QoS egress queues/port
1,024 egress rules and 512 egress meter
Egress bandwidth rate shaping per egress queue and per port
Rate Limiting Granularity: 8 Kbps – 1Mbps
LED Indicators
Per port status LED including power status
System Status LEDs: management, fan and power
Motion Detection LED
Total External Ports with VIM-4-40G4X Populated
44 port 10GASE-T RJ-45 (100M/1G/10G tri speed) plus additional 4
combo ports of 10GBASE-T RJ-45 (1G/10G dual speed) shared with
10GBASE-X SFP+ (1G/10G dual speed)
4 port 40GBASE-X QSFP+ (10G/40G dual speed)
One RJ-45 RS-232c Serial port (control port)
One 10/100/1000BASE-T out-of-band management port
Power Supply Support
Summit 550W AC PSU
Summit 550W DC PSU
Physical Specifications
Summit X670
Height: 1.73 Inches/4.4 cm
Width: 17.4 Inches/44.1 cm
Depth: 20.4 Inches/51.9 cm
Weight: 17.0 lbs/7.7 kg (Summit X670V-48t; w/o PSU or VIM4-40G4X)
Physical Specifications (continued)
VIM4-40G4X
Height: 1.6 Inches/4.1 cm
Width: 4.1 Inches/10.3 cm
Depth: 6.5 Inches/16.6 cm
Weight: 0.99 lbs/0.45 kg
Summit X670 Fan Module
Height: 1.65 Inches/4.2 cm
Width: 1.65 Inches/4.2 cm
Depth: 3.98 Inches/10.1 cm
Weight: 0.357 lbs/0.162 kg
Operating Specifications
Operating Temperature Range: 0° C to 45° C (32° F to 113° F)
Operating Humidity: 10% to 95% relative humidity, non-condensing
Operating Altitude: 0-3,000 meters (9,850 feet)
Operational Shock (Half Sine): 30 m/s2 (3 g), 11ms, 60 Shocks
Operational Random Vibration: 3-500 MHz @ 1.5g rms
Storage & Transportation Conditions (Packaged)
Transportation Temperature: -40° C to 70° C (-40° F to 158° F)
Storage and Transportation Humidity: 10% to 95% RH, non-condensing
Packaged Shock (Half Sine): 180 m/s2 (18 g), 6ms, 600 shocks
Packaged Sine Vibration: 5-62 Hz @ Velocity 5mm/s, 62-500 Hz @ 0.2G
Packaged Random Vibration: 5-20 Hz @ 1.0 ASD w/-3dB/oct.
from 20-200 Hz
14 drops min on sides & corners @ 42” (<15 kg box)
Acoustic Noise
Summit X670V-48t (FB): 56.6 dB(A) – 68.8dB(A)
Regulatory/Safety
North American Safety of ITE
UL 60950-1 1st Ed., Listed Device (U.S.)
CSA 22.2#60950-1-03 1st Ed. (Canada)
Complies with FCC 21CFR 1040.10 (U.S. Laser Safety)
CDRH Letter of Approval (U.S. FDA Approval)
European Safety of ITE
EN60950-1:2006
EN 60825-1+A2:2001 (Lasers Safety)
TUV-R GS Mark by German Notified Body
2006/95/EC Low Voltage Directive
International Safety of ITE
CB Report & Certificate per IEC 60950-1:2006 + National Dierences
AS/NZS 60950-1 (Australia/New Zealand)
EMI/EMC Standards
North America EMC for ITE
FCC CFR 47 part 15 Class A (U.S.A.)
ICES-003 Class A (Canada)
European EMC Standards
EN 55022:2006 Class A
EN 55024:A2-2003 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11
EN 61000-3-2,8-2006 (Harmonics)
EN 61000-3-3 1995+A2:2005 (Flicker)
ETSI EN 300 386 v1.3.3, 2005-04 (EMC Telecommunications)
2004/108/EC EMC Directive
Summit X670-48t Switch
Technical Specifications