Datasheet

© 2010 Extreme Networks, Inc. All rights reser ved. Summit X450a Series—Page 10
Extreme Networks Data Sheet
Technical Specifications
Summit X450a-48tDC
General Specifications
Performance
256 Gbps switch fabric bandwidth
130.9 Mpps frame forwarding rate
9,216 Byte maximum packet size
(Jumbo Frame)
128 load sharing trunks, up to 8 members
per trunk
8 QoS queues/port
4,094 VLANs (Port, Protocol, IEEE 802.1Q)
2,048 centralized ACL rules per 24-port block
Forwarding Tables
Layer 2/MAC Addresses: 16K
IPv4 LPM Entries: 12K
IPv6 LPM Entries: 6K
Rate Limiting
Ingress bandwidth policing/rate limiting
per flow
Egress bandwidth rate shaping per egress
queue and per port
Rate Limiting Granularity: 64 Kbps
Available Rate Limiters: 2,048 per
24-port block
Indicators
Per port status LED including power status
System Status LEDs: management, fan
and power
Ports
48 ports 10/100/1000BASE-T with
auto-speed and auto-polarity
4 ports SFP (shared PHY with 4
10/100/1000BASE-T ports)
1 port Serial (control port)
1 10/100BASE-T out-of-band management port
Per port status LED including power status
Option Slot
Slot for XGM2 dual 10 gigabit option module
External Power Supply Support
EPS-150DC
Physical Specifications
Dimensions
Height: 1.73 Inches/4.4 cm
Width: 17.4 Inches/44.1 cm
Depth: 15.3 Inches/38.9 cm
Weight: 15.5 lbs/7.03 kg
Operating Specifications
Operating Temperature Range: 0° C to 40° C
(32° F to 104° F)
Operating Humidity: 10% to 93% relative
humidity, non-condensing
Operating Altitude: 0 – 3,000 meters
(9,850 feet)
Operational Shock (Half Sine): 30m/s2 (3g),
11ms, 60 Shocks
Operational Random Vibration:
3 – 500 MHz @ 1.5g rms
Storage & Transportation Conditions (Packaged)
Transportation Temperature: -40 °C to 70 °C
(-40 °F to 158 °F)
Storage and Transportation Humidity:
10% to 95% RH, noncondensing
Packaged Shock (Half Sine): 180m/s2 (18g),
6ms, 600 shocks
Packaged Sine Vibration: 5 – 62 Hz @ Velocity
5mm/s, 62 – 500 Hz @ 0.2G
Packaged Random Vibration: 5 – 20 Hz @ 1.0
ASD w/-3dB/oct. from 20 – 200 Hz
14 drops min on sides & corners @ 42”
(<15kg box)
Power & Acoustic Sound
Nominal Input Ratings: -48VDC, 4.5A
Voltage Input Range: -36 to -72 V
Input current: 4.0A @ -36VDC, 2.0A @ -72VDC
Inrush current: 40 A peak maximum
Input wire harness: Extreme PN 250088
Wire size: 14 AWG
Connector on cable: TYCO PN 206060-1
Bystander Sound Pressure: 54 dBA
right side @ .6 m
Summit X450a-48t
General Specifications
Performance
256 Gbps switch fabric bandwidth
130.9 Mpps frame forwarding rate
9,216 Byte maximum packet size
(Jumbo Frame)
128 load sharing trunks, up to 8 members
per trunk
8 QoS queues/port
4,094 VLANs (Port, Protocol, IEEE 802.1Q)
2,048 centralized ACL rules per 24-port block
Forwarding Tables
Layer 2/MAC Addresses: 16K
IPv4 LPM Entries: 12K
IPv6 LPM Entries: 6K
Rate Limiting
Ingress bandwidth policing/rate limiting
per flow
Egress bandwidth rate shaping per egress
queue and per port
Rate Limiting Granularity: 64 Kbps
Available Rate Limiters: 2,048 per
24-port block
Indicators
Per port status LED including power status
System Status LEDs: management, fan
and power
Ports
48 ports 10/100/1000BASE-T with
auto-speed and auto-polarity
4 ports SFP (shared PHY with 4
10/100/1000BASE-T ports)
1 port Serial (control port)
1 10/100BASE-T out-of-band management port
Per port status LED including power status
Option Slot
Slot for XGM2 dual 10 gigabit option module
External Power Supply Support
EPS-500
Physical Specifications
Dimensions
Height: 1.73 Inches/4.4 cm
Width: 17.4 Inches/44.1 cm
Depth: 17.0 Inches/43.2 cm
Weight: 15.8 lbs/7.14 kg
Operating Specifications
Operating Temperature Range: 0° C to 40° C
(32° F to 104° F)
Operating Humidity: 10% to 93% relative
humidity, non-condensing
Operating Altitude: 0 – 3,000 meters
(9,850 feet)
Operational Shock (Half Sine): 30m/s2 (3g),
11ms, 60 Shocks
Operational Random Vibration:
3 – 500 MHz @ 1.5g rms
Storage & Transportation Conditions (Packaged)
Transportation Temperature: -40° C to 70° C
(-40° F to 158° F)
Storage and Transportation Humidity:
10% to 95% RH, noncondensing
Packaged Shock (Half Sine): 180m/s2 (18g),
6ms, 600 shocks
Packaged Sine Vibration: 5 – 62 Hz @ Velocity
5mm/s, 62-500 Hz @ 0.2G
Packaged Random Vibration: 5 – 20 Hz @ 1.0
ASD w/-3dB/oct. from 20 – 200 Hz
14 drops min on sides & corners @ 42”
(<15kg box)
Power & Acoustic Sound
Voltage Input Range: 90 – 264V
Nominal Input Ratings: 100~240V, 50/60 Hz,
1.5A
Nominal Input Current: 1.45 A @ 115V~
(lowline) 0.65A @ 230V~ (highline)
Maximum In-Rush Current: 30A @115V/60 Hz,
Max Load
Efficiency: 80% with 60% – 100% load
Line Frequency Range: 47 – 63 Hz
Nominal Frequency Range: 50 – 60 Hz
Power Supply Input Socket: IEC 320 C14
Power Cord Input Plug: IEC 320 C13
Heat Dissipation: 160W (512 BTU/hr)
Sound Power in accordance with EN 300 753
(10-1997)