Datasheet

ManualsBrandsExtreme Networks Manualscomputer components16113

Extreme Networks Data Sheet

Technical Speciﬁcations

Summit X350 Series

All Regulatory/Safety Standards

North American Safety of ITE

• UL 60950-1 1st Ed., Listed Device (U.S.)

• CSA 22.2#60950-1-03 1st Ed. (Canada)

• Complies with FCC 21CFR 1040.10

(U.S. Laser Safety)

• CDRH Letter of Approval (U.S. FDA Approval)

European Safety of ITE

• EN60950-1:2001+A11

• EN 60825-1+A2:2001 (Lasers Safety)

• TUV-R GS Mark by German Notiﬁed Body

• 2006/95/EC Low Voltage Directive

International Safety of ITE

• CB Report & Certiﬁcate per IEC 60950-1:2001

+ National Differences

• AS/NZS 60950-1 (Australia/New Zealand)

EMI/EMC Standards

North America EMC for ITE

• FCC CFR 47 part 15 Class A (U.S.A.)

• ICES-003 Class A (Canada)

European EMC Standards

• EN 55022:2003 Class A

• EN 55024:A2-2003 Class A includes

IEC 61000-4-2, 3, 4, 5, 6, 11

• EN 61000-3-2,8-2000(Harmonics)

• EN 61000-3-3 1995+A1:2001(Flicker)

• ETSI EN 300 386 v1.3.3, 2005-04

(EMC Telecom munications)

• 2004/108/EC EMC Directive

International EMC Certiﬁcations

• CISPR 22: 2005, Class A

(International Emissions)

• CISPR 24:A2:2003 Class A

(International Immunity)

• IEC/EN 61000-4-2:2001 Electrostatic

Discharge, 8kV Contact, 15 kV Air, Criteria A

• EC/EN 61000-4-3:2002 Radiated Immunity

10V/m, Criteria A

• EC/EN 61000-4-4:2004 Transient Burst,

1 kV, Criteria A

• IEC/EN 61000-4-5:2001 Surge, 2 kV L-L,

2 kV L-G, Level 3, Criteria A

• IEC/EN 61000-4-6:2004 Conducted Immunity,

0.15-80 MHz, 10V/m unmod. RMS, Criteria A

• EC/EN 61000-4-11:2004 Power Dips &

Interruptions, >30%, 25 periods, Criteria C

Country Speciﬁc

• VCCI Class A (Japan Emissions)

• ACMA (C-Tick) (Australia Emissions)

• KCC Mark EMC Approval (Korea)

Telecom Standards

• EN/ETSI 300 386:2001

(EMC Telecommunica tions)

• EN/ETSI 300 019 (Environmental

for Telecommunications)

IEEE 802.3 Media Access Standards

• IEEE 802.3ab 1000BASE-T

• IEEE 802.3z 1000BASE-X

• IEEE 802.3ae 10GBASE-X

• IEEE 802.3an 10GBASE-T

Environmental Standards

• EN/ETSI 300 019-2-1 v2.1.2 (2000-09) -

Class 1.2 Storage

• EN/ETSI 300 019-2-2 v2.1.2 (1999-09) -

Class 2.3 Transportation

• EN/ETSI 300 019-2-3 v2.1.2 (2003-04) -

Class 3.1e Operational

• EN/ETSI 300 753 (1997-10) – Acoustic Noise

• ASTM D3580 Random Vibration Unpackaged 1.5G

Warranty

• Ltd. Lifetime with express Advanced Hardware

Replacement (for products shipped from

Extreme Networks on or after June 29, 2009)

• For warranty details,

visit www.extremenetworks.com/go/warranty

Summit X350-48t

General Speciﬁcations

Performance

• 176 Gbps switch fabric bandwidth

• 101.2 Mpps frame forwarding rate

• 9,216 Byte maximum packet size (Jumbo Frame)

• 25 load sharing trunks, up to 8 members

per trunk

• 8 QoS queues/port

• 4,094 VLANs (Port, Protocol, IEEE 802.1Q)

• 1,024 centralized ACL rules per 24-ports

Forwarding Tables

• Layer 2/MAC Addresses: 8K

Rate Limiting

• Ingress bandwidth policing/rate limiting

per ﬂow

• Egress bandwidth rate shaping per egress queue

and per port

• Rate Limiting Granularity: 64Kbps

• Available Rate Limiters: 1,024 per 24-port

Indicators

• Per port status LED including power status

• System Status LEDs: management, fan

and power

Ports

• 48 ports 10/100/1000BASE-T with

auto-speed and auto-polarity

• 4 ports 1000BASE-X SFP (shared PHY with 4

10/100/1000BASE-T ports)

• 1 port Serial (control port)

• 1 10/100BASE-T out-of-band management port

• Per port status LED including power status

• Slot for XGM2 10 Gigabit Option Module

External Power Supply Support

• EPS-500

Physical Speciﬁcations

Dimensions

• Height: 1.73 Inches/4.4 Cm

• Width: 17.35 Inches/44.1 Cm

• Depth: 17.0 Inches/43.2 Cm

• Weight: 15.75 Lbs / 7.14 Kg

Operating Speciﬁcations

Temperature

• Operating Temperature Range:

0° C to 40° C (32° F to 104° F)

• Operating Humidity: 10% to 93% relative

humidity, non-condensing

• Operational Shock (Half Sine):

30 m/s2 (3g), 11ms, 60 Shocks

• Operational Random Vibration:

3 – 500 MHz @ 1.5g rms

Storage & Transportation Conditions (Packaged)

• Transportation Temperature:

-40° C to 70° C (- 40° F to 158° F)

• Storage and Transportation Humidity:

10% to 95% RH, non-condensing

• Packaged Shock (Half Sine):

180 m/s2 (18g), 6ms, 600 shocks

• Packaged Sine Vibration: 5 – 62 Hz @ Velocity

5mm/s, 62 – 500 Hz @ 0.2 G

• Packaged Random Vibration: 5 – 20 Hz @ 1.0

ASD w/-3dB/oct. from 20 – 200 Hz

• 14 drops min on sides & corners @ 42”

(<15kg box)

Power & Accoustic Sound

• Voltage Input Range: 90 – 264V

• Nominal Input Ratings: 100~240V,

50/60 Hz, 1.5A

• Nominal Input Current: 1.45A @ 100V~ (lowline)

0.65A @ 230V~ (highline)

• Maximum In-Rush Current: 30A @ 115V;

60A @ 230V/6.0 Hz, Max Load

• Efﬁciency: 80% with 60% – 100% load

• Line Frequency Range: 47 – 63 Hz

• Nominal Frequency Range: 50 – 60 Hz

• Power Supply Input Socket: IEC 320 C14

• Power Cord Input Plug: IEC 320 C13

• Heat Dissipation: 115W (393 BTU/hr)

• Nominal Maximum Power Consumption:

115W (393 BTU/hr)

• Sound Power in accordance with

EN 300 753 (10-1997)

• Sound Power: 49.9 dBA

• Declared Sound Power: 6.4 belsA per

ISO 7779 & ISO 9296

• Bystander Sound Pressure in accordance with

NEBS GR-63 Issue 2

• Bystander Sound Pressure: 39.7 dBA