Datasheet

© 2010 Extreme Networks, Inc. All rights reser ved. Summit X450e Series—Page 8
Extreme Networks Data Sheet
Technical Specifications
• Heat Dissipation (without PoE): 54W (184 BTU/hr)
• Power Consumption (without PoE):
54W (184 BTU/hr)
• Sound Power in accordance with EN 300 753
(10-1997)
• Sound Power: 62 dBA per ISO 7779
• Declared Sound Power: 6.4 belsA per
ISO 7779 & ISO 9296
• Bystander Sound Pressure in accordance with
NEBS GR-63 Issue 2
• Bystander Sound Pressure:
54 dBA right side @ .6m
Summit X450e-48p/
SummitX450e-48p-TAA
General Specifications
Performance
• 256 Gbps switch fabric bandwidth
• 130.9 Mpps frame forwarding rate
• 9,216 Byte maximum packet size (Jumbo Frame)
• 128 load sharing trunks, up to 8 members
per trunk
• 8 QoS queues/port
• 4,094 VLANs (Port, Protocol, IEEE 802.1Q)
• 1,024 centralized ACL rules per 24-ports
Forwarding Tables
• Layer 2/MAC Addresses: 8K
• IPv4 LPM Entries: 512
• IPv6 LPM Entries: 256
Rate Limiting
• Ingress bandwidth policing/rate limiting per flow
• Egress bandwidth rate shaping per egress queue
and per port
• Rate Limiting Granularity: 64Kbps
• Available Rate Limiters: 1,024 per 24-ports
Indicators
• Per port status LED including power status
• System Status LEDs: management, fan
and power
Ports
• 48 ports 10/100/1000BASE-T PoE with
auto-speed and auto-polarity
• 4 ports SFP (shared PHY with 4
10/100/1000BASE-T ports)
• 1 port Serial (control port)
• 1 10/100BASE-T out-of-band management port
Option Slot
• Slot for XGM2 dual 10 gigabit option module
External Power Supply Support
• EPS-C with EPS-600LS
Physical Specifications
Dimensions
Height: 1.73 Inches/4.4 Cm
Width: 17.35 Inches/44.1 Cm
Depth: 17.0 Inches/43.2 Cm
Weight: 16.25 lbs/7.4 Kg
Operating Specifications
Temperature
• Operating Temperature Range: 0° C to 40° C
(32° F to 104° F)
• Operating Humidity: 10% to 93% relative
humidity, non-condensing
• Operational Shock (Half Sine): 30 m/s2 (3g),
11ms, 60 Shocks
• Operational Random Vibration:
3-500 MHz @ 1.5g rms
Storage & Transportation Conditions (Packaged)
• Transportation Temperature: -40° C to 70° C
(- 40° F to 158° F)
• Storage and Transportation Humidity:
10% to 95% RH, non-condensing
• Packaged Shock (Half Sine): 180 m/s2 (18g),
6ms, 600 shocks
• Packaged Sine Vibration: 5 – 62 Hz @ Velocity
5mm/s, 62 – 500 Hz @ 0.2 G
• Packaged Random Vibration: 5 – 20 Hz @ 1.0
ASD w/-3dB/oct. from 20 – 200 Hz
• 14 drops min on sides & corners @ 42”
(<15kg box)
Power & Acoustic Sound
• Voltage Input Range: 90 – 264V
• Nominal Input Ratings: 100~240V, 50/60 Hz, 6.0A
• Nominal Input Current: 5.25A @ 100V~ (lowline)
2.5A @ 230V~ (highline)
• Maximum In-Rush Current:
30A @115V/6.0 Hz, Max Load
• Efficiency: 80% with 60% – 100% load
• Line Frequency Range: 47 – 63 Hz
• Nominal Frequency Range: 50 – 60 Hz
• Power Supply Input Socket: IEC 320 C14
• Power Cord Input Plug: IEC 320 C13
• Heat Dissipation (with PoE full load):
180W (614 BTU/hr)
• Power Consumption (with PoE full load):
507W (1,730 BTU/hr)
• Heat Dissipation (without PoE): 73W (250 BTU/hr)
• Power Consumption (without PoE):
73W (250BTU/hr)
• Sound Power in accordance with EN 300 753
(10-1997)
• Sound Power: 62 dBA per ISO 7779
• Declared Sound Power: 6.4 belsA per
ISO 7779 & ISO 9296
• Bystander Sound Pressure in accordance with
NEBS GR-63 Issue 2
• Bystander Sound Pressure:
54 dBA right side @ .6m
Summit X450e Series – All
Regulatory/Safety Standards
North American Safety of ITE
• UL 60950-1 1st Ed., Listed Device (U.S.)
• CSA 22.2#60950-1-03 1st Ed. (Canada)
• Complies with FCC 21CFR 1040.10
(U.S. Laser Safety)
• CDRH Letter of Approval (U.S. FDA Approval)
European Safety of ITE
• EN60950-1:2001+A11
• EN 60825-1+A2:2001 (Lasers Safety)
• TUV-R GS Mark by German Notified Body
• 2006/95/EC Low Voltage Directive
International Safety of ITE
• CB Report & Certificate per IEC 60950-1:2001
+ National Differences
• AS/NZS 60950-1 (Australia/New Zealand)
EMI/EMC Standards
North America EMC for ITE
• FCC CFR 47 part 15 Class A (U.S.A.)
• ICES-003 Class A (Canada)
European EMC Standards
• EN 55022:2003 Class A
• EN 55024:A2-2003 Class A includes
IEC 61000-4-2, 3, 4, 5, 6, 11
• EN 61000-3-2,8-2000(Harmonics)
• EN 61000-3-3 1995+A1:2001(Flicker)
• ETSI EN 300 386 v1.3.3, 2005-04
(EMC Telecommunications)
• 2004/108/EC EMC Directive
International EMC Certifications
• CISPR 22: 2005, Class A (International Emissions)
• CISPR 24:A2:2003 Class A
(International Immunity)
• IEC/EN 61000-4-2:2001 Electrostatic
Discharge, 8kV Contact, 15 kV Air, Criteria A
• EC/EN 61000-4-3:2002 Radiated Immunity
10V/m, Criteria A
• EC/EN 61000-4-4:2004 Transient Burst,
1 kV, Criteria A
• IEC/EN 61000-4-5:2001 Surge, 2 kV L-L,
2 kV L-G, Level 3, Criteria A
• IEC/EN 61000-4-6:2004 Conducted Immunity,
0.15-80 MHz, 10V/m unmod. RMS, Criteria A
• EC/EN 61000-4-11:2004 Power Dips &
Interruptions, >30%, 25 periods, Criteria C
Country Specific
• VCCI Class A (Japan Emissions)
• ACMA (C-Tick) (Australia Emissions)
• KCC Mark EMC Approval (Korea)
Telecom Standards
• EN/ETSI 300 386:2001
(EMC Telecommunications)
• EN/ETSI 300 019
(Environmental for Telecommunications)
IEEE 802.3 Media Access Standards
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3z 1000BASE-X
• IEEE 802.3ae 10GBASE-X
• IEEE 802.3an 10GBASE-T
Environmental Standards
• EN/ETSI 300 019-2-1 v2.1.2 (2000-09) –
Class 1.2 Storage
• EN/ETSI 300 019-2-2 v2.1.2 (1999-09) –
Class 2.3 Transportation
• EN/ETSI 300 019-2-3 v2.1.2 (2003-04) –
Class 3.1e Operational
• EN/ETSI 300 753 (1997-10) – Acoustic Noise
• ASTM D3580 Random Vibration Unpackaged 1.5G
Warranty
• Ltd. Lifetime with express Advanced Hardware
Replacement (for products shipped from
Extreme Networks on or after June 29, 2009)
• For warranty details,
visit www.extremenetworks.com/go/warranty