User manual

25
| ENGLISH
*2ND TIME PERIOD SWITCHON
At this point, the second time period must be programmed. The sequence to be followed is the same and is repeated as for
the 1ST TIME PERIOD SWITCHON. On this occasion it is only necessary to enter the time, for example start at 15:00 and Stop
at 22:00 and to activate the days Saturday and Sunday by setting them at "ON".
CONTROLS PROCEDURE:
Press key 6 once and SET POWER will
appear
Press key 2 until USER SET
SET
USER
1ST TIME PERIOD SWITCHOFF
Use keys 4 - 5 to enter the time “12:00”,
which corresponds to the switch-o
time of the 1st time period.
To conrm and continue programming,
press button 6. Press button 3 to go
back to the previous parameter.
STOP PRG1
OFF
.
.
.
.
STOP PRG1
12:00
Press key 6 to conrm
SET CLOCK will appear
Press key 2 until CHRONO SET
SET CHRONO
ENABLE 1ST TIME PERIOD DAYS
Use keys 4 and 5 to enable ON/disable
OFF the days
Keys 2 and 3 to scroll the various days,
select from Monday to Friday on ON,
excluding Saturday and Sunday (OFF)
To conrm and proceed press key 6
MONDAY..PRG1
ON
.
.
.
.
FRIDAY..PRG1
ON
Press key 6 to conrm and continue
programming.
START PRG1 OFF appears
START PRG1
OFF
H2O TEMPERATURE SET 1ST TIME
PERIOD
Using buttons 4 and 5 select the
desired H2O temperature
(65-80°C)
To conrm and proceed press key 6
SET PRG1
75°C
1ST TIME PERIOD SWITCHON
Use keys 4 - 5 to enter the time “08:00”,
which corresponds to the switch-on
time of the 1st time period.
To conrm and continue programming,
press button 6. Press button 3 to go
back to the previous parameter.
START PRG1
08:00
2ND TIME PERIOD SWITCHON*
At this point, the second time period
must be programmed.
START PRG2
OFF
The sequence to be followed is the same and is repeated
as for the 1ST TIME PERIOD switch-on.
PROGRAMMING EXAMPLE
Let's suppose that the weekly programmer function is to be used and 4 time periods are to be used in the following way:
1st time period: from 08:00 to 12:00 every day of the week excluding Saturday and Sunday
2nd time period: from 15:00 to 22:00 only Saturday and Sunday with both times having a water temperature set of 75°C
J
FOLLOW THE INSTRUCTIONS DESCRIBED IN THE "ENABLE CHRONO" CHAPTER TO ENABLE THE CHRONO
WHEN THE WEEKLY PROGRAMMER IS ACTIVE, A RELATIVE ICON WILL LIGHT UP ON THE CONTROL BOARD