User manual
19
| ENGLISH
COMMISSIONING SETTINGS
Once the power cable at the back of the stove has been connected, move the switch, also located on the back, to (I).
The switch at the back of the stove powers the stove board.
The stove remains o and a rst screen appears on the panel
reading OFF.
ADJUSTING THE TIME, DAY, MONTH AND YEAR
Set clock allows to adjust the time and date
CONTROLS PROCEDURE
Press P6 and SET POWER will appear
Press key 2 several times until USER MENU is displayed
Confirm using key 6
SET CLOCK will appear
Confirm using key 6
Use key 4 or 5 to assign the day
Proceed by pressing key 2
Use the same procedure: 4 or 5 to set and key 2 to move forward; to
adjust the hours, minutes, day, month and year
Press key 1 several times to conrm and exit the Menu
SET CLOCK
DAY MON,TUE,WED,…SUN
HOUR 0...23
MINUTES 00...59
DATE 1...31
MONTH 1...12
YEAR 00...99
ADJUSTING THE LANGUAGE
It is possible to select the preferred language to display the various messages.
CONTROLS PROCEDURE
Press P6 and SET POWER will appear
Press key 2 several times until USER MENU is displayed
Confirm using key 6
SET CLOCK will appear
Press key 2 until SET LANGUAGE
Confirm using key 6
Select the language using key 4 or 5.
Press key 1 several times to conrm and exit the Menu
SET LANGUAGE
LANGUAGE
ITALIAN
ENGLISH
GERMAN
FRENCH
SPANISH
J
NO FLOW ALARM CLEAN CHECK UP ALARM
SHOULD THE "ALL NO FLOW ALL CLEAN CHECK UP" ALARM BE
TRIGGERED, MAKE SURE THAT THE BOTTOM OF THE BURN POT IS
FREE OF RESIDUE OR SCALES. THE HOLES AT THE BOTTOM MUST BE
COMPLETELY FREE TO GUARANTEE CORRECT COMBUSTION. THE "PELLET
FEED REGULATION" FUNCTION CAN BE USED
TO ADJUST COMBUSTION BASED ON THE DESCRIBED REQUIREMENTS. IF
THE ALARM PERSISTS AND THE ABOVE LISTED CONDITIONS HAVE BEEN
CHECKED, CONTACT THE QUALIFIED AFTERSALES ASSISTANCE CENTRE.
BURN POT BOTTOM
IT IS FORBIDDEN TO USE THE APPLIANCE WITHOUT THE DIVIDER AND/
OR GLASS PROTECTION SEE THE FIGURE AT THE SIDE. ITS REMOVAL
JEOPARDISES THE SAFETY OF THE PRODUCT AND IMMEDIATELY RENDERS
THE WARRANTY PERIOD NULL AND VOID. IN THE CASE OF WEAR OR
DETERIORATION REQUEST AFTERSALES ASSISTANCE FOR REPLACEMENT
OF THE PART REPLACEMENT THAT IS NOT UNDER GUARANTEE AS THE
COMPONENT IS SUBJECT TO WEAR.
UPPER DIVIDER BURN POT - KEEP THE CORRECT POSITION AS
INDICATED IN THE FIGURE
GLASS PROTECTION