User manual

18
THE REMOTE CONTROL
All that can normally be implemented through the LCD can be adjusted can be adjusted using the remote control.
The table below provides a detailed description of the various functions:
INFO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 ON / OFF Pressing the key for three seconds, the stove will switch-on or o
2 POWER INCREASE Pressing the key will increase the operating power
3 POWER DECREASE Pressing the key will decrease the operating power
4 T° INCREASE The set temperature can be increased by pressing this key
5 T° DECREASE The set temperature can be decreased by pressing this key
6
ENABLE/DISABLE
CHRONO
Pressing the key once will enable or disable the chrono
7
ENABLE DELAYED
SWITCHOFF
The delayed switch-o can be set by pressing this key.
For example, if the stove is set to switch-o in an hour, it shall switch-o
automatically once the set time elapses, displaying the countdown every
minute.
8 MENU
This key provides access to the user and technical menu (the technical
menu is reserved for assistance)
9 INCREASE The set temperature can be increased by pressing this key
10 ESC KEY
The key allows the user to exit any programme or display and returns to
the main menu without saving the data
11 REVERSE The key returns to the display of the various menus
12 CONFIRMATION KEY
This key conrms the adjustments made during the user menu
programming phase
13 FORWARD The key moves forward in the various menus
14 ENABLE F1 FUNCTION Pre-set key for future applications
15 DECREASE The key decreases the value to be set
16 STOVE STATUS Pressing this key will display the general status of the stove
Note: the numbers shown on the remote control are purely indicative and are not present on the remote control supplied with the product.
TYPE AND REPLACEMENT OF BATTERIES
The batteries are housed in the lower part of the remote
control.
To replace them, remove the battery holder (as indicated in the
gure at the back of the remote control), remove or
insert the battery according to the symbol on the
remote control and on the battery itself.
For operation, 1 CR2025, 3V lithium buer battery is
required.
If the remote control is o because it has no
batteries, stove can be controlled from the
control panel on top of it.
While replacing the battery, pay attention to the
polarity by observing the symbol on the inside
compartment of the remote control.
The batteries used contain metals harmful
for the environment. They must therefore
be disposed of separately in appropriate
containers.
| ENGLISH