User`s guide

Installation

Drivers are provided for the Adapter on the XTNDAccess CD-ROM. Once

installed, the drivers allow the Adapter to plug and play when the Adapter is

connected to the USB port of your computer.

IMPORTANT: It is recommended that previously installed infrared

software be removed prior to installing the Adapter drivers.

IMPORTANT: The Adapter drivers must be installed prior to connecting

the adapter to the USB port.

To Install the Adapter Drivers:

1. Insert the XTNDAccess CD-ROM into the CD-ROM drive on your

desktop computer.

2. On the startup screen, select Install XTNDAccess Drivers.

2. Follow the install program instructions to complete the software

installation.

NOTE: If the startup screen does not appear, select and run cdmenu.exe

from the CD-ROM directory.