User`s guide

With USB Cradle

1. In the ActiveSync Connection Settings dialog on the desktop PC, clear the check boxes for all Allow USB connection to

this desktop connector options.

2. On the device side, select Settings, Connections, and PC. Clear the Automatically synchronize when serial cable is

connected using: check box.

Note If the user does not see the Desktop Connector icon in the system tray as it should look when starting the OneBridge

Client software, you must start the Desktop Connector.

3. Open the Desktop Connector dialog window either by double-clicking on the icon, or right-clicking on the icon and selecting

Open Desktop Connector.

4. CE USB should say Docked if USB cradle is connected to desktop PC. If it does not, try taking USB cradle out and put it in

again. When CE USB says Docked, Desktop Connector is ready for a Windows CE device over USB.