User`s guide

42
Synchronizing the SyncML Mobile Device
SyncML Client Configuration
To configure a SyncML client to work with the SyncML server, the following information needs to be set up in the device SyncML
client and the SyncML configuration (e.g., in Nokia Remote Sync profile configuration or Ericsson Synchronization
configuration).
• Server URL
• Server User Id
• Server Password
• Database names
• Database User Ids and Passwords. (optional)
Server URL
This is the URL on which the SyncML server will be running. In the OneBridge Sync Server default installation, the http server
will be running in port number 5001. If OneBridge Sync Server is installed on a machine with an IP address of nnn.nnn.nnn.nnn,
the server URL will be as follows:
• http://nnn.nnn.nnn.nnn:5001/cgi-bin/syncmlcgi.exe (for Ericsson phones etc. where the URL includes the port
number)
Alternatively, the URL may be specified as,
• http://nnn.nnn.nnn.nnn/cgi-bin/syncmlcgi.exe
• Port: 5001 (for Nokia phones, etc., where the port number is specified separately from the URL)
Server User ID and Server Password
This is the user ID and password used for connection authentication and, optionally, database authentication when no database
username and passwords are used. For example, if Windows NT authentication is used, this will be the NT user ID and
password.
Database names
The data stores currently supported for SyncML are Contacts and Calendar. The server database name must be configured in
the client for the SyncML client to communicate with the server. The names for the databases are as follows:
• Contacts = Contacts
• Calendar = Calendar
These are case-sensitive names and must be specified without quotes. In the Ericsson R520 SyncML client, you will enter these
names in Phonebook path or Calendar Path under Synchronization Configuration. In Nokia clients, you will specify these
names in the data tab under RemoteSync profile settings.