User`s guide

7
Supported Groupware
• Lotus Notes 4.6, R5, R6
• Exchange 5.5, 2000, 2003
Pre-Installment Requirements
Before installing OneBridge Sync Server, review this section for access setup requirements to be considered prior to install. Also
see the Deployment Considerations.
General
• The OneBridge Service requires a user account that is a member of the local administrator group.
• The port number the Sync Server is running on.
Exchange
• If using the DMZ Proxy, the port number being used. A DMZ Proxy must be used for a wireless connection.
• A Resolver account must be setup prior to installing the Exchange Groupware Adapter.
• The complete Outlook 2000/2003 Client (including CDO) must be installed on the computer that is running the
Exchange Adapter.
• The Exchange Adapter and Exchange Server must be located in the same domain.
• If the Exchange Adapter is installed on Windows 2000, the Adapter service cannot be run as the local system account.
It is necessary to select an account that has administrator privileges for the Adapter service.
• For Live Connect, the account running the Adapter service must have the Exchange service account Admin role that is
assigned through the Exchange Administration program and have the privileges of Administer Information Store and
Receive As enabled. The account must also have administrator privileges in the local machine and have Act as part
of operating system set in the local security policy.
Notes
• The user account running the OneBridge Service must have read/write access to the OneBridge install directory.
• For Live Connect, the Notes Listener uses the Primary ID to detect user change. This is configured on the Notes
Adapter Configuration - Login Information screen. This ID must have reader access in the ACL of all databases that will
be Live Connect enabled. If the Notes Adapter is configured to use individual user IDs when accessing user data, the
individual users' ID will be used when delivering the data. In this configuration, the Primary ID is only used to detect the
changes.
• If using the DMZ Proxy, the port number being used. A DMZ Proxy must be used for a wireless connection.
• Lotus Notes 5.06 or higher must be installed on the same machine as the Notes groupware adapter.
DMZ Requirements
When deploying with a DMZ proxy, an additional server in the DMZ is required. This could be a shared server since the DMZ
proxy does not consume a large amount of CPU.
Stand-alone Adapters
When deploying stand-alone adapters, a separate server needs to be allocated for the adapters. Typically, adapters consume a
large amount of system resources, requiring a dedicated server.