User manual

7VPC300‐en‐GB_v1.55/15
STARTDELAY
Theteststartdelaytimeisadjustable(3to100 seconds).FromtheParticlesetupmenu,use
theUpandDownarrowstoselectStartDelay.PresstheEnter( ) buttontoentertheoption
and Press Enter again to activate the setting for editing.Use the arrow keys to select the
desire delay time. The test will not start untilthe programmed delay time haselapsed. Use
theEscbuttontosavethesettingandtoreturntothemenulist.


CHANNELDISPLAY
Selectchannelsthataretobedisplayed.FromtheParticlesetupmenu,usetheUpandDown
arrowsto select Channel Display.Press the Enter( ) buttonto enter the option.Use the
arrowkeys toselect the channel and press theEnterkeytoselector de‐selectthe channel.
UsetheEsckeytosavethesettingandtoreturntothemenu.


AMBIENTTEMPERAURE/%RH
EnableorDisabletheambienttemperatureandrelativehumiditydisplays.FromtheParticle
setupmenu,usetheUpandDownarrowstoselectAmbientTemp/RH.PresstheEnter(
)
buttontoentertheoption.UsethearrowkeystoselectEnableorDisableanduse theESC
buttontosaveandreturntothemenu.


SAMPLECYCLE
Setthe desirednumber oftestcyclesto run. FromtheParticlesetupmenu,usetheUp and
Down arrows to select Sample Cycle.Press the Enter (
) button to enter the option and
PressEnteragaintoactivatethesettingforediting.Usethearrowkeystoselectthenumber
ofcyclestorunthetest(1to100).PressESCtosavesettingandtoreturntothemenulist.




