User Manual

10 SL355-EU-EN-V1.4
8.5 DATA Mode Menu Table
Display Description Display Description
HH:MM:SS
(Use ▼ to scroll
items below)
Current Time
HH:MM:SS
(Use ► to scroll items
below)
Current Time
DD:MM:YY Current Date BEG Datalogger Begin Time
SPL
Sound Pressure
Level
rUN
†
Current memory location
(01-20)
DUR Test Duration
USr (selected setup)
View %DOSE and TWA
using ▲ and ▼buttons
60 to 130db
70 to 140db
Measurement Ranges
Er Exchange rate (Q) in db
tHr Threshold in db
CrIt Criterion level in db
LP
Logging Period (mm:ss)
from 1 sec. to 1 hour
†
Scroll the RUN parameter list using the ▼ ▲ buttons to locate the EPty XX parameter which indicates the
number of empty memory locations or runs remaining (00 to 20); if recording is attempted with all memory
locations full, the meter will display ‘EPty00’ indicating that there are no (zero) empty storage locations
remaining (data must then be cleared from the meter before continuing; use the OPTION menu to clear
data).