User manual

SL130-EU-ENG 3.1 6/08 7

Battery Replacement

AC power is the normal power source for this meter. If 8 AA batteries are used, they are

located in the rear battery compartment. When the battery icon appears on the meter's

LCD, it is time to replace the batteries.

1. Turn power off.

2. Open the rear battery cover

3. Insert the batteries into battery holder, observing the correct polarity.

4. Put the battery cover back in place.

You, as the end user, are legally bound (Battery ordinance) to return all used

batteries and accumulators; disposal in the household garbage is prohibited!

You can hand over your used batteries / accumulators, gratuitously, at the

collection points for our branches in your community or wherever batteries /

accumulators are sold!

Disposal

Follow the valid legal stipulations in respect of the disposal of the device at the end of its

lifecycle

CAUTIONS

• This device is not a toy and must not reach children’s hands. It contains hazardous

objects as well as small parts that the children could swallow. In case a child

swallows any of them, please contact a physician immediately

• Do not leave batteries and packing material lying around unattended; they can be

dangerous for children if they use them as toys

• In case the device is going to be unused for an extended period of time, remove the

batteries to prevent them from draining

• Expired or damaged batteries can cause cauterization on contact with the skin.

Always, therefore, use suitable hand gloves in such cases

• See that the batteries are not short-circuited. Do not throw batteries into the fire.

2006 Extech Instruments Corporation.