User manual

5 SDL730-en-GB_V1.0 12/16
5. PressandholdtheSETbuttonforatleast1.5secondstoexittothenormaloperationmode
(orsimplywait7secondsforthemetertoautomaticallyswitchtothe normaloperating
mode).
 Enabling/DisablingtheAutoPowerOFFFeature
1. AccessthePoFFparameter.
2. UsethearrowbuttonstoselectONorOFF.WiththeAutoPowerOFFfeatureenabled,the
meterwillautomaticallyswitchOFFafter10minutesofinactivity.
3. PressENTERtoconfirmsetting.
4. PressandholdtheSETbuttonforatleast1.5seconds
toexittothenormaloperationmode
(orsimplywait7secondsforthemetertoautomaticallyswitchtothe normaloperating
mode).

SettheBeeperSoundONorOFF
1. AccessthebEEPparameter.
2. UsethearrowbuttonstoselectONorOFF.
3. PressENTERtoconfirmsetting.
4. PressandholdtheSETbuttonforatleast1.5secondstoexittothenormaloperationmode
(orsimplywait7secondsforthemetertoautomaticallyswitch
tothenormaloperating
mode).
NumericalFormat(commaordecimal)
EuropeanandUSAnumericalformatsdiffer.ThemeterdefaultstoUSAmodewhereadecimal
pointisusedtoseparateunitsfromtenths,i.e.20.00;TheEuropean formatusesacomma,i.e.
20,00toseparateunitsfromtenths.Tochangethissetting:
1. AccessthedECparameter.
2. Usethe
arrowbuttonstoselectUSAorEUro.
3. PressENTERtoconfirmsetting.
4. PressandholdtheSETbuttonforatleast1.5secondstoexittothenormaloperationmode
(orsimplywait7secondsforthemetertoautomaticallyswitchtothe normaloperating
mode).
SDCardFORMATTING
1. AccesstheSdFparameter.
2. UsethearrowbuttonstoselectYEStoformatthecard(selectNOtoabort).Notethatall
dataonthecardwillbelostifformattingisattempted.
3. PressENTERtoconfirmselection.
4. PressENTERagaintore‐confirm.
5. The
meterwillautomaticallyreturntothenormaloperatingmodewhenformattingis
complete.Ifnot,pressandholdtheSETbuttonforatleast1.5secondstoexittothenormal
operationmode.



