User manual

SD900enGB_V1.101/16
5
3. Operation
Power
1. Installsix(6)‘AAA’1.5Vbatteriesinthemeter.Thebatteriesprovide backuppowerforthe
clock.
2. ConnecttheAC/DCpoweradaptortotheDC9Vinputonthemeter.Thepoweradaptoris
requiredfordatalogging.
3. Whenthe
iconappearsinthedisplaythebatteriesareweakandshouldbereplaced.
However,inspec.measurementsmaystillbemadeforseveralhours,afterthelowbattery
indicatorappears.
ConnectingCurrentCables
1. Connectthecurrentlooptotheplugasshownandthen
inserttheplugintothesocketsonthebottomofthe
datalogger(observecorrectpolarity).
2. Uptothreecablesmaybeinstalled.
3. Thecurrentfortheinsertedcableswillbedisplayed1,2,
and3fromtop
tobottom.
4. 0.00isdisplayedforopenorunusedinputs.
Datalogging
1. OpentheleftsidedoorandinsertaformattedSDcard
Notes:
TheSDcardshouldbe1GBto4GBincapacity.
Donotusememorycardsformattedbyothermetersorcameras.UsetheSDcard
formattingprocedureundertheadvancedfeaturessectionofthismanualtocorrectly
formatthecard.
Theinternalclockmustbesettothecorrecttime.Seetheadvancedfeaturessectionof
thismanualtosettheclock.
Thedefaultdatastructureusesadecimalpoint“.”asthenumericdecimalindicator.See
theadvancedfeaturessectionofthismanualtochangethistoacomma“,”.
IftheSDmemorycardisnotinstalled,EMPTYwillappearinthedisplay.
Ifthecurrentcableisnotinstalled,randomnumbersmayappearinthedatafile.
Ifthecurrentcableisnotinstalled,afterdatadownloadthe
unitssymbolmaynotappear
inthedisplay.