User Manual

SD200-EU-EN-V1.2-7/10

Advanced Settings

The SET function is used to:

• Format the SD memory card

• Set the date and time

• Set the sampling time

• Set the beeper sound ON/OFF

• Set the SD card Decimal character

• Select the Temperature units

• Set the RS232 data output ON/OFF

1. Press and Hold the SET button for >2 seconds to enter the setting mode. The first

function (Sd F) will appear in the display. Press the SET button to step through the

seven functions. Use the ▲ and ▼ buttons to adjust the selected function. Use the

“LOGGER” button to step through fields within a function. In the SET mode, if no

button is pressed within 5 seconds the logger will revert back to the standard mode.

2. Sd F – Format the SD card. Press the ▲ button to select yES or no. For yES, press

the Enter button to format the card and erase all existing data.

3. dAtE – Set the date and time. Press the ▲ or ▼ buttons to adjust the selected

(blinking) field. Press the Enter button to store the value and to step through the

various fields.\

4. SP-t – Set the sample rate. Press the ▲ button to select the desired sample rate and

press Enter to store the selection. The selections are: 5, 10, 30, 60, 120, 300, 600

seconds and AUTO. In AUTO, the data will be stored every time there is a

temperature change of >1 degree.

5. bEEP - Set the beeper ON or OFF. Press the ▲ button to select ON or OFF and

press Enter to store the selection.

6. dEC - Set the SD card Decimal character. Press the ▲ button to select USA

(decimal) or Euro (comma) and press Enter to store the selection.

7. t-CF - Set the Temp. unit to °F or °C

8. rS232 - Set the RS232 data output ON/OFF. Press the ▲ button to select ON or off

and press Enter to store the selection

9. ESC – Exit the setting mode. Press the SET button to return to normal operation.

System RESET

If a condition appears where the CPU does not respond to keystrokes or the meter seems

frozen, press the RESET button on the side of the datalogger (use a paper clip or similar

pointed object) to return the meter to a working state.

RS232 Interface

A serial output is provided to link the meter to a PC’s serial port. Call Technical Assistance

for more information on this interface.